Plasterboard

1. Install plasterboard by placing a dab of cornice cement at 300mm centres on the wall
2. Place some small packers against the floor and wall junction 10mm typically
3. Place the sheet vertically or horizontally against the wall on top of the packers
4. Use a straight edge and tap the plasterboard which will squash the cornice cement out like a pancake and will push the cornice cement into the dovetailed grooves of the ZEGO Form
5. The cornice cement when dry will mechanically lock to the ZEGO Form
6. Cornice cement is recommended as it dries more quickly.However, stud adhesive can also be used
7. Typically, the gap behind the plasterboard would be approximately 5mm

Benefits

1. No screw holes to set and sand
2. When painted, the walls look better as you do not see any screw hole patches
3. Fast and simple
4. The cornice cement takes up any tolerances ensuring the plasterboard lies flat and straight

Tips

1. During the height of summer or in hotter climates, mix some GP 100 with the cornice cement to slow down the setting process
2. Mix to a consistency similar to toothpaste

Plasterboard

Click here for Plasterboard Video

• < Prev